Popular Posts

Tuesday, September 22, 2015

882RGD Raynor Opener Multi-Function Wall Control Panel

Do you need to replace the wall control station on your Raynor operator? Make sure you get the correct one because they aren't all the same. The Raynor operator 882RGD Multi-Function Wall Control Panel can be used on all the Security+2.0 Raynor operators that have a Yellow learn button and a Yellow antenna. Here is a list of the compatible Raynor operators:

http://www.garagedoorzone.com/6080960-Raynor-882RGD-Wall-Control-Panel-MyQ-Security20-6080960.htm?sourceCode=blogAirman II (8155RGD)
Aviator II (8355RGD)
Pilot II (8365RGD)
Corporal II (8165RGD)

  


  • Door Control Push Bar: Press to open or close the door. Press again to reverse the door during the close cycle or to stop the door while it's opening
  • Light Feature: Press the Light button to switch the opener light on or off. When the door is open or closed the light will remain on for 4-1/2 minutes
  • Lock Feature: Designed to prevent operation of the door from portable remote controls. However, the door will open and close from the Door Control Push Button and from a Keyless entry accessory
  • Learn Button: Used to add, reprogram or change a remote control or keyless entry pin number
  • Maintenance Alert System (MAS): When the garage door opener needs to be serviced (approx. 4500 garage door opener cycles) the command (yellow) and service (red) LEDs will begin to alternately flash back and forth


  • You can purchase a new 882RGD Wall Control Station here at the Garage Door Zone

    No comments: