Whether you lost your remote or just want to get a spare the Marantec 382 Digital Remote is the one to use for your Marantec garage door opener. The 2-button remote can be used to work two separate Marantec garage door openers.
The 382 Digital Remote is compatible with the Synergy Solo, Synergy 260, Synergy 270, Synergy 280, Synergy 360, Synergy 370 and Synergy 380 Marantec model openers. It's also compatible with models M4500e, M4700e, M4900e, M4500ECO, M4700ECO, M50, and M55. If you have an older model Marantec opener it may be compatible but you'll need to check if your opener uses 315MHz frequency radio receiver. We recommend you read the article "How to Find The Correct Marantec Garage Door Opener Remote" first to help you determine if the 382 Digital Remote is compatible.
The 382 2-Button Digital Remote replaces the previous model M3-2312 remote.
Below are instructions on how to program a new remote into a Marantec M4500e, M4700e, or M4900e garage door opener.
Important: if you have a working remote then scroll down and follow the Programming Additional Remotes instructions otherwise start with the Programming One Remote instructions.
If you have one of the Marantec EOS garage door openers (models M4500e,
M4700e and M4900e) and don't have any working remotes then you'll need
to program one remote into the unit. Any additional remotes that you
want to use with the opener will have to be programmed by using a Programming Jumper.
*As a side note: "universal" style remotes found in box stores and hardware stores are NOT compatible with Marantec garage door openers. Only Marantec brand remotes work with the Marantec operators.
PROGRAMMING ONE REMOTE
*Look at the powerhead (motor unit on the ceiling) and you'll see the
eight Red LED lights and the three programming buttons (P, +, -)
Press and HOLD the "P" button for about 3 seconds
LED lights #8,1 & 2 will light up solid
Press & RELEASE the "P" button 2 times
Now LED lights #6, 7, & 8 should be lit up
Press & HOLD the button on the remote that you would like to use to operate the opener
While you are holding the remote button you should see #7 LED light flash rapidly
Now release the remote button
Push and RELEASE the "P" button one time & you will exit the programming mode
Congratulations....you just programmed the remote
PROGRAMMING ADDITIONAL REMOTES
Now, what if you have additional remotes that you want to program? This is where the programming jumper comes into play and it looks like this:
Here are the instructions to program additional remotes using the program jumper after you programmed one remote into the opener:
You connect the jumper
between the existing programmed remote and the new remote
Press and HOLD the
button on the existing remote that currently works your opener
Then
press & HOLD the button on the new remote that you want to work the
opener
The LED light on the remotes flicker & you're done.
You can shop for Marantec garage door opener replacement remotes, wireless keypad, replacement batteries and operator parts at the Garage Door Zone Store
It happens all the time - you purchase a new house and the previous owner doesn't leave any remotes to the garage door opener. Or you've lost the remote to your Marantec operator but don't have a manual to see what remote is compatible. Or maybe you have a remote but it's so worn you can't even tell what model it is anymore.
We've got some answers to help you figure it out. Read our latest post on our Support Manuals site - Helpful Tips and Information section where we go over a couple of easy ways to determine if the latest available Marantec remote will work with your opener or what your options are if your remote has been discontinued.
It doesn't matter if you have a 20 year old Marantec Mac-Lift III opener or a two year old Synergy 260 opener the "How To Find The Correct Marantec Garage Door Opener Remote" post should help you find what you need to get your opener back to working with a garage door remote again.
