The New M13-631 Marantec Wireless Keyless Entry

Marantec has recently introduced the new M13-631 Wireless Keyless Entry for their garage door operator lineup.

Marantec M13-631 Keyless

Over the past few years Marantec has been using the M3-631 Keyless Entry for all of their current openers but there were a few drawbacks to that keyless. Fortunately Marantec seems to have addressed some of those issues and made improvements in the new M13-631 Keyless Entry.

This keyless works like the old one in that you pick a 4-digit PIN number to operate the opener. That's where the similarities seem to end. Here is a list of some of the improvements with the new keyless entry:

• Holds 4 Different PINs - you can program it to work four separate Marantec openers or program one opener with four different PINs
• Improved Faceplate Numbers - the numbers are now raised, backlit and harder which means they should last longer from use
• Slide Up Cover - the cover over the numbers slides up instead of flipping up which will keep it from blowing in the wind & breaking like the old one
• Uses AAA Batteries - the unit includes (and uses) two AAA batteries. Easy to replace batteries and should last longer than 3volt batteries
• Low Battery Indicator - now you don't have to guess if the batteries are low. Keypad buttons flash when batteries need replaced.
• No Jumper Needed To Program - the old keyless needed a jumper to transfer the code from the remote to the keyless. Most people lost or misplaced the jumper so it wasn't convenient. With the new M13-613 Keyless you just hold a working remote up to the keyless & press the button on the remote to start the programming process.
• Programming Tip: install a new CR2032 3-volt battery in your remote before you try to program the keyless. With a strong battery the programming should work fine. With an older battery in the remote it may take 7 or 8 tries (or may not work at all). 
• Programming Instructions: you can find the M13-631 Keyless programming instructions here on our Manual Support Site

With a little thought it seems Marantec has improved the design and functionality with the new M13-631 Wireless Keyless Entry. Sleek new design, easy programming and durability. A great addition to go along with the following Marantec opener models: M55, M4500, M4700,  Q7500, Q7700, Q7900, M4500e, M4700e, M4900e, Synergy 270, Synergy 370, Synergy 380

Not sure if your opener is compatible? Look at the remote for your opener. If 315MHz is printed on the back of the remote then the M13-631 Keyless will work with your opener. You can also use the Contact Form on the left side of this page and we'll be happy to help you.

Want more information or ready to purchase? Go to the Garage Door Zone Store

Purchase the new M13-631 Keyless Entry