Popular Posts

Friday, August 17, 2018

Marantec Synergy 270 Opener - Programming A Remote

Below are instructions on programming a garage door remote to the Marantec model Synergy 270 operator. You'll only use the instructions below if you don't have any remotes programmed to the operator. The Marantec operators can only hold the code of one remote. Additional remotes copy the code of the one programmed remote so if you are looking to program additional remotes check out the blog post Programming Marantec Remote Video here. However, what do you do if you don't have an existing remote (perhaps you lost it or you just moved into the home and they didn't leave you a remote). Here's a rundown on how to program a new remote by using the buttons on the powerhead (motor) unit on the ceiling.

Synergy 270 Operator

Here is what the programming buttons look like on the powerhead that you will use to program the remote:

Synergy 270 Program Buttons & Display
LED Display

Program the remote into the opener powerhead by using the "+", "-", and "P" buttons on the powerhead. Here is a rundown on how to program the remote using the buttons on the powerhead unit on the ceiling. You should see 3 red buttons:  "+"button / "-"button / "P" button.

TO PROGRAM A REMOTE (or make/change any adjustment):
Press and hold the "P" button for approximately 3 seconds. When
the display of the DOOR OPEN POSITION on the LED Display illuminates release the button.
You are now ready to set or change the desired adjustment.

Press and release the "P" button until the REMOTE CONTROL icon on the LED DISPLAY is illuminated

The opener can now learn the code of the hand-held remote transmitter. 

Press and hold the button on the remote transmitter.

Release the remote transmitter button. The opener has now learned the particular
code of this transmitter.
M13-631 Keyless Entry

Once the opener has successfully received the code from the
transmitter, press and release the "P" button. This stores the
code in memory. It also completes the adjustment setting
sequence, and completes the program process.

The ON icon should now be illuminated on the LED DISPLAY and the opener is ready for operation.

 And that's how you program a remote to the Marantec Synergy 270 operator. Remember if  you need to program additional remotes you can see the video on how to use the programming jumper here.

Do you need a new remote for your operator? You can purchase the Digital 382 Marantec remote here (it replaces the old discontinued M3-2312 remote). In the market for a wireless keyless entry? You can find the Marantec M13-631 Keyless Entry here.

Digital 382 Remote

No comments: