Raynor 545RGD Radio Receiver

Sometimes the radio receivers on electric operators will go bad and the remotes will no longer work. A power surge or lightning strike nearby can cause the receiver to fail. The Raynor 545RGD Radio Receiver is an external mounted receiver that was used on some (but not all) Raynor operators such as the R-Series (R150,R160,R170,etc.) or the Flitestar models. The #545RGD Receiver is no longer available but the #535LM Receiver will also work.

If your remote controls have any of the following Raynor model numbers on them then the 535LM Receiver will work with them:

• 971RGD, 972RGD, 973RGD
• 61RGD, 62RGD, 63RGD
• 81RGD, 82RGD, 83RGD, 84RGD

The 535LM Radio Receiver is 390MHz frequency Code Hopping and will accept the above rolling code Security + remotes and the others listed. It will hold 8 of the Security + remotes (the 900 series), one of the 600 series or 12 of the 800 series of remotes. Note that the 900 series of remotes can't be mixed with the other series of remotes but you can use the 600 series with the 800 series.