Finding the right remote to work with your opener no longer has to be confusing though with the introduction of the Liftmaster 893MAX Remote a few years ago. The 893MAX is a 3-button remote
that can work on 390MHz and 315MHz frequencies and be programmed to work three garage door openers. It is backwards compatible which means it can replace all of the previous models of remotes of which many have been discontinued.
893MAX Liftmaster Remote |
As far as a compatible replacement for Raynor garage door openers it will work on all Raynor garage door openers manufactured since 2000. There's a list below of all of the Raynor openers that the 893MAX Remote will work with. If you have an older Raynor Flitestar or R-Series garage door opener then please read our other blog post: Raynor Remotes Part II - Flitestar and R-Series Openers. We cover the different remotes that have been used over the years and how you can find the correct one for your opener.
As mentioned above the 893MAX Remote replaces all of the previous remotes that have been used with the Raynor garage door openers manufactured since 2000. Here is a list of the remotes that the 893MAX remote replaces.
893MAX Remote replaces these models:
81RGD, 83RGD, 971RGD, 972RGD, 973RGD, 974RGD, 371RGD, 372RGD, 373RGD, 374RGD
And here is a list of all of the Raynor garage door openers that the 893MAX Remote is compatible with:
893MAX Remote compatible with these Raynor openers:
- Admiral (3850RGD), Admiral II (8550RGD), Admiral II WiFi (8550WRGD)
- Airman (3270RGD), Airman II (8155RGD)
- Aviator (1280RGD/2280RGD/3280RGD), Aviator II (8355RGD/8355WRGD)
- Corporal (3255RGD), Corporal II (8165RGD/8165WRGD)
- Commander (2220RGD/3220RGD), Commander II (3240RGD)
- Endeavor (2585RGD/3585RGD)
- General II (WLEDRGD)
- Pilot (1265RGD/2265RGD/3265RGD), Pilot II (8365RGD/8365WRGD-267)
- Navigator (1245RGD/2245RGD/3245RGD)
- Prodigy (3800RGD), Prodigy II (8500RGD/8500WRGD)
- Sergeant II (8160WRGD)
- Ultra (2595RGD/3595RGD), Ultra II (8587RGD/8587WRGD)
Have a question about a remote or your garage door opener? Feel free to email us at: Blog@GarageDoorZone.com and we'll do our best to answer your questions. You can also leave a comment below.
2 comments:
Hi. I am trying to program the outside keypad for a Raynor opener but I don’t have the old code.
Can this be done? This has been very frustrating. This is a Raynor FLTSTR opener. Please help.
Margaret - magswkelly@verizon.net or magswkelly@gmail.com
It probably can be done.
Send us an email at: Flitestar@GarageDoorZone.com
With your email include the issue you stated here and if you can include a picture of your keypad and the back of the Flitestar garage door operator. This will help us determine what radio equipment is on your operator and what instructions to give you.
Brian
Post a Comment